Contact 772-286-2260

U.S. SEAL MFG™ PS-205 61C-PS205
  1. pin-int

U.S. SEAL MFG™ PS-205 61C-PS205

U.S. SEAL MFG™ PS-205 Mechanical Seal, 1-3/4 in, 350 psi, Buna-N, For Use With: Pumps, Mixers, Blenders and Compressors

  • Manufacturer: U.S. SEAL MFG
  • Brand Name: U.S. SEAL MFG™
  • Part#: 61C-PS205
  • MPN: PS-205
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading Available at Vero Beach
  • loading Available at All Branches

U.S. SEAL MFG™ Mechanical Seal, 1-3/4 in Connection, 350 psi, Buna-N, Specifications: -40 to 425 deg F, For Use With: Pumps, Mixers, Blenders and Compressors, Additional Information: 2-3/8 in OD Seal Head, 2 in H Seal, 2-1/2 in Mating Ring Bore, 1/2 in THK Mating Ring, Carbon Primary Ring, Stainless Steel Metal Part, Ceramic Mating Ring, Stainless Steel Spring AND BERK S32015

SPECIAL_ORDER_ITEM      :      N
Special Order Item      :      N
  • Self-adjusting elastomer bellows compensate for abnormal shaft end play and primary face sealing wear
  • Effects of radial and axial shaft end play are minimized by uniform spring pressure
  • Positive drive is transmitted through the drive band and drive notches, which absorb breakout and running torque
  • Damaging stresses on the elastomer bellows are prevented
  • Slippage is eliminated, thus protecting shaft and sleeve against wear and scoring
  • The result is long seal life
  • The seal's large single coil spring is much sturdier than a multiple spring construction design
  • The spring is non-clogging, self-cleaning and will not foul up due to fluid contact
  • Corrosion and clogging problems are eliminated
  • pdfCatalog https://assets.unilogcorp.com/267/ITEM/DOC/U_S_SEAL_MFG_PS_1000_Catalog.pdf