Contact 772-286-2260

BAROID® 201214 62C-D206
  1. pin-int

BAROID® 201214 62C-D206

BAROID® 201214 Polymer Emulsion, 1 gal, Pail

  • Manufacturer: Baroid Industrial Drilling Products
  • Brand Name: BAROID®
  • Part#: 62C-D206
  • MPN: 201214
  • Min. Order Qty: 1
  • Qty. Interval: 1
  • loading Available at Vero Beach
  • loading Available at All Branches

EZ-MUD® liquid polymer emulsion contains partially hydrolyzed polyacrylamide/polyacrylate (PHPA) copolymer and is used primarily as a borehole stabilizer to prevent reactive shale and clay from swelling and sloughing. EZ-MUD® polymer emulsion is also added to low-solids drilling fluids to increase lubricity, fluid viscosity and to improve carrying capacity of air/foam injection fluids.

BAROID® Polymer Emulsion, 1 gal Net Content, Pail Container, Liquid Form, Odor/Scent: Mild Hydrocarbon, Opaque White, Composition: 10 to 30% Hydrotreated Light Petroleum Distillate, 1 to 3% Ethoxylated Branched C13 Alcohol, 0.002 mmHg Vapor Pressure, 1 Specific Gravity, 175 deg C Boiling Point, >93 deg C Flash Point, 6 to 8 pH

SPECIAL_ORDER_ITEM      :      N
Special Order Item      :      N
  • Stabilize reactive shale and clay formations
  • Improve drilling efficiency in water well, minerals exploration, geotechnical, HDD and construction applications
  • Enhance slurry rheological properties
  • Alleviate mud rings, bit balling and booting-off in clay formations
  • Reduce drill pipe torque and pumping pressure
  • Minimize rod chatter core drilling
  • Can be used to create a "stiff-foam"
  • Flocculate non-reactive solids
  • Mixes easily with minimum shear in fresh water
  • Helps provide effective clay and shale stabilization with lower viscosity
  • Helps impart high degree of lubricity
  • Breaks down chemically with household bleach (sodium hypochlorite)
  • pdfSDS https://assets.unilogcorp.com/267/ITEM/DOC/BAROID_201214_SDS.pdf
  • pdfSpecification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/BAROID_201214_Specification_Sheet.pdf