Hunter® RFC 79-RFC

Most rain sensing devices work by accumulating a set amount of rainfall before a switch is activated that interrupts the circuit from the controller and shuts off the system. In that accumulation time, the system will unnecessarily continue to water. This can look especially bad for conservation conscious municipalities, businesses and residences. With built-in Quick Response technology, the Hunter® Rain-Clik™ and wireless Rain-Clik™ can command a controller to shutoff right when it starts to rain. The Rain-Clik™ can be mounted on an eave or any flat vertical surface like a wall or fence. A gutter-mount is also available that allows for easy installation of the Rain-Clik™ on the edge of a gutter.

Hunter® Rain/Freeze-Clik Sensor, 24 V, 3 A, Connection Type: Wired, Plastic, 18 cm L x 6 cm H

• Instant Quick Response rain shut-off and freeze shut-off at 3 deg C
• Adjustable vent ring allows for shorter or longer reset period
• Rugged polycarbonate housing and metal extension arm
• Compatible with most normally open or normally closed irrigation controllers
• Time to turn off irrigation system approximately 2 to 5 min for quick response
• Time to reset quick response approximately 4 hr under dry, sunny conditions
• Time to reset when fully wet approximately 3 days under dry, sunny conditions

• Catalog https://assets.unilogcorp.com/267/ITEM/DOC/Hunter_RFC_Catalog.pdf
• Instruction/Installation Manual https://assets.unilogcorp.com/267/ITEM/DOC/Hunter_RAINCLIK_Instruction_Installation_Manual.pdf
• Specification Sheet https://assets.unilogcorp.com/267/ITEM/DOC/Hunter_RFC_Specification_Sheet.pdf